Header logo is


2020


Utilizing Interviews and Thematic Analysis to Uncover Specifications for a Companion Robot
Utilizing Interviews and Thematic Analysis to Uncover Specifications for a Companion Robot

Burns, R. B., Seifi, H., Lee, H., Kuchenbecker, K. J.

Workshop paper (2 pages) presented at the ICSR Workshop on Enriching HRI Research with Qualitative Methods, Virtual, November 2020 (misc)

Abstract
We will share our experiences designing and conducting structured video-conferencing interviews with autism specialists and utilizing thematic analysis to create qualitative requirements and quantitative specifications for a touch-perceiving robot companion tailored for children with autism. We will also explain how we wrote about our qualitative approaches for a journal setting.

hi

link (url) [BibTex]

2020


link (url) [BibTex]


Characterization of a Magnetic Levitation Haptic Interface for Realistic Tool-Based Interactions
Characterization of a Magnetic Levitation Haptic Interface for Realistic Tool-Based Interactions

Lee, H., Tombak, G. I., Park, G., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

Abstract
We introduce our recent study on the characterization of a commercial magnetic levitation haptic interface (MagLev 200, Butterfly Haptics LLC) for realistic high-bandwidth interactions. This device’s haptic rendering scheme can provide strong 6-DoF (force and torque) feedback without friction at all poses in its small workspace. The objective of our study is to enable the device to accurately render realistic multidimensional vibrotactile stimuli measured from a stylus-like tool. Our approach is to characterize the dynamics between the commanded wrench and the resulting translational acceleration across the frequency range of interest. To this end, we first custom-designed and attached a pen-shaped manipulandum (11.5 cm, aluminum) to the top of the MagLev 200’s end-effector for better usability in grasping. An accelerometer (ADXL354, Analog Devices) was rigidly mounted inside the manipulandum. Then, we collected a data set where the input is a 30-second-long force and/or torque signal commanded as a sweep function from 10 to 500 Hz; the output is the corresponding acceleration measurement, which we collected both with and without a user holding the handle. We succeeded at fitting both non-parametric and parametric versions of the transfer functions for both scenarios, with a fitting accuracy of about 95% for the parametric transfer functions. In the future, we plan to find the best method of applying the inverse parametric transfer function to our system. We will then employ that compensation method in a user study to evaluate the realism of different algorithms for reducing the dimensionality of tool-based vibrotactile cues.

hi

link (url) [BibTex]

link (url) [BibTex]


Tactile Textiles: An Assortment of Fabric-Based Tactile Sensors for Contact Force and Contact Location
Tactile Textiles: An Assortment of Fabric-Based Tactile Sensors for Contact Force and Contact Location

Burns, R. B., Thomas, N., Lee, H., Faulkner, R., Kuchenbecker, K. J.

Hands-on demonstration presented at EuroHaptics, Leiden, The Netherlands, September 2020, Rachael Bevill Burns, Neha Thomas, and Hyosang Lee contributed equally to this publication (misc)

Abstract
Fabric-based tactile sensors are promising for the construction of robotic skin due to their soft and flexible nature. Conductive fabric layers can be used to form piezoresistive structures that are sensitive to contact force and/or contact location. This demonstration showcases three diverse fabric-based tactile sensors we have created. The first detects dynamic tactile events anywhere within a region on a robot’s body. The second design measures the precise location at which a single low-force contact is applied. The third sensor uses electrical resistance tomography to output both the force and location of multiple simultaneous contacts applied across a surface.

hi

Project Page Project Page [BibTex]

Project Page Project Page [BibTex]


no image
Estimating Human Handshape by Feeling the Wrist

Forte, M., Young, E. M., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


Sweat Softens the Outermost Layer of the Human Finger Pad: Evidence from Simulations and Experiments
Sweat Softens the Outermost Layer of the Human Finger Pad: Evidence from Simulations and Experiments

Nam, S., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020, Award for best poster in 2020 (misc)

hi

Project Page [BibTex]

Project Page [BibTex]


no image
Intermediate Ridges Amplify Mechanoreceptor Strains in Static and Dynamic Touch

Serhat, G., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


no image
Seeing Through Touch: Contact-Location Sensing and Tactile Feedback for Prosthetic Hands

Thomas, N., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

Abstract
Locating and picking up an object without vision is a simple task for able-bodied people, due in part to their rich tactile perception capabilities. The same cannot be said for users of standard myoelectric prostheses, who must rely largely on visual cues to successfully interact with the environment. To enable prosthesis users to locate and grasp objects without looking at them, we propose two changes: adding specialized contact-location sensing to the dorsal and palmar aspects of the prosthetic hand’s fingers, and providing the user with tactile feedback of where an object touches the fingers. To evaluate the potential utility of these changes, we developed a simple, sensitive, fabric-based tactile sensor which provides continuous contact location information via a change in voltage of a voltage divider circuit. This sensor was wrapped around the fingers of a commercial prosthetic hand (Ottobock SensorHand Speed). Using an ATI Nano17 force sensor, we characterized the tactile sensor’s response to normal force at distributed contact locations and obtained an average detection threshold of 0.63 +/- 0.26 N. We also confirmed that the voltage-to-location mapping is linear (R squared = 0.99). Sensor signals were adapted to the stationary vibrotactile funneling illusion to provide haptic feedback of contact location. These preliminary results indicate a promising system that imitates a key aspect of the sensory capabilities of the intact hand. Future work includes testing the system in a modified reach-grasp-and-lift study, in which participants must accomplish the task blindfolded.

hi

[BibTex]

[BibTex]


no image
Haptify: a Comprehensive Benchmarking System for Grounded Force-Feedback Haptic Devices

Fazlollahi, F., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


no image
Vision-based Force Estimation for a da Vinci Instrument Using Deep Neural Networks

Lee, Y., Husin, H. M., Forte, M., Lee, S., Kuchenbecker, K. J.

Extended abstract presented as an Emerging Technology ePoster at the Annual Meeting of the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES), Cleveland, Ohio, USA, August 2020 (misc) Accepted

hi

[BibTex]

[BibTex]


Physical Variables Underlying Tactile Stickiness during Fingerpad Detachment
Physical Variables Underlying Tactile Stickiness during Fingerpad Detachment

Nam, S., Vardar, Y., Gueorguiev, D., Kuchenbecker, K. J.

Frontiers in Neuroscience, 14(235):1-14, April 2020 (article)

Abstract
One may notice a relatively wide range of tactile sensations even when touching the same hard, flat surface in similar ways. Little is known about the reasons for this variability, so we decided to investigate how the perceptual intensity of light stickiness relates to the physical interaction between the skin and the surface. We conducted a psychophysical experiment in which nine participants actively pressed their finger on a flat glass plate with a normal force close to 1.5 N and detached it after a few seconds. A custom-designed apparatus recorded the contact force vector and the finger contact area during each interaction as well as pre- and post-trial finger moisture. After detaching their finger, participants judged the stickiness of the glass using a nine-point scale. We explored how sixteen physical variables derived from the recorded data correlate with each other and with the stickiness judgments of each participant. These analyses indicate that stickiness perception mainly depends on the pre-detachment pressing duration, the time taken for the finger to detach, and the impulse in the normal direction after the normal force changes sign; finger-surface adhesion seems to build with pressing time, causing a larger normal impulse during detachment and thus a more intense stickiness sensation. We additionally found a strong between-subjects correlation between maximum real contact area and peak pull-off force, as well as between finger moisture and impulse.

hi

link (url) DOI Project Page [BibTex]


Changes in Normal Force During Passive Dynamic Touch: Contact Mechanics and Perception
Changes in Normal Force During Passive Dynamic Touch: Contact Mechanics and Perception

Gueorguiev, D., Lambert, J., Thonnard, J., Kuchenbecker, K. J.

In Proceedings of the IEEE Haptics Symposium (HAPTICS), pages: 746-752, Washington, USA, March 2020 (inproceedings)

Abstract
Using a force-controlled robotic platform, we investigated the contact mechanics and psychophysical responses induced by negative and positive modulations in normal force during passive dynamic touch. In the natural state of the finger, the applied normal force modulation induces a correlated change in the tangential force. In a second condition, we applied talcum powder to the fingerpad, which induced a significant modification in the slope of the correlated tangential change. In both conditions, the same ten participants had to detect the interval that contained a decrease or an increase in the pre-stimulation normal force of 1 N. In the natural state, the 75% just noticeable difference for this task was found to be a ratio of 0.19 and 0.18 for decreases and increases, respectively. With talcum powder on the fingerpad, the normal force thresholds remained stable, following the Weber law of constant just noticeable differences, while the tangential force thresholds changed in the same way as the correlation slopes. This result suggests that participants predominantly relied on the normal force changes to perform the detection task. In addition, participants were asked to report whether the force decreased or increased. Their performance was generally poor at this second task even for above-threshold changes. However, their accuracy slightly improved with the talcum powder, which might be due to the reduced finger-surface friction.

hi

DOI [BibTex]

DOI [BibTex]


A Fabric-Based Sensing System for Recognizing Social Touch
A Fabric-Based Sensing System for Recognizing Social Touch

Burns, R. B., Lee, H., Seifi, H., Kuchenbecker, K. J.

Work-in-progress paper (3 pages) presented at the IEEE Haptics Symposium, Washington, DC, USA, March 2020 (misc)

Abstract
We present a fabric-based piezoresistive tactile sensor system designed to detect social touch gestures on a robot. The unique sensor design utilizes three layers of low-conductivity fabric sewn together on alternating edges to form an accordion pattern and secured between two outer high-conductivity layers. This five-layer design demonstrates a greater resistance range and better low-force sensitivity than previous designs that use one layer of low-conductivity fabric with or without a plastic mesh layer. An individual sensor from our system can presently identify six different communication gestures – squeezing, patting, scratching, poking, hand resting without movement, and no touch – with an average accuracy of 90%. A layer of foam can be added beneath the sensor to make a rigid robot more appealing for humans to touch without inhibiting the system’s ability to register social touch gestures.

hi

Project Page [BibTex]

Project Page [BibTex]


Do Touch Gestures Affect How Electrovibration Feels?
Do Touch Gestures Affect How Electrovibration Feels?

Vardar, Y., Kuchenbecker, K. J.

Hands-on demonstration (1 page) presented at the IEEE Haptics Symposium, Washington, DC, USA, March 2020 (misc)

hi

[BibTex]

[BibTex]


Learning to Predict Perceptual Distributions of Haptic Adjectives
Learning to Predict Perceptual Distributions of Haptic Adjectives

Richardson, B. A., Kuchenbecker, K. J.

Frontiers in Neurorobotics, 13(116):1-16, Febuary 2020 (article)

Abstract
When humans touch an object with their fingertips, they can immediately describe its tactile properties using haptic adjectives, such as hardness and roughness; however, human perception is subjective and noisy, with significant variation across individuals and interactions. Recent research has worked to provide robots with similar haptic intelligence but was focused on identifying binary haptic adjectives, ignoring both attribute intensity and perceptual variability. Combining ordinal haptic adjective labels gathered from human subjects for a set of 60 objects with features automatically extracted from raw multi-modal tactile data collected by a robot repeatedly touching the same objects, we designed a machine-learning method that incorporates partial knowledge of the distribution of object labels into training; then, from a single interaction, it predicts a probability distribution over the set of ordinal labels. In addition to analyzing the collected labels (10 basic haptic adjectives) and demonstrating the quality of our method's predictions, we hold out specific features to determine the influence of individual sensor modalities on the predictive performance for each adjective. Our results demonstrate the feasibility of modeling both the intensity and the variation of haptic perception, two crucial yet previously neglected components of human haptic perception.

hi

DOI Project Page [BibTex]


no image
Exercising with Baxter: Preliminary Support for Assistive Social-Physical Human-Robot Interaction

Fitter, N. T., Mohan, M., Kuchenbecker, K. J., Johnson, M. J.

Journal of NeuroEngineering and Rehabilitation, 17(19), Febuary 2020 (article)

Abstract
Background: The worldwide population of older adults will soon exceed the capacity of assisted living facilities. Accordingly, we aim to understand whether appropriately designed robots could help older adults stay active at home. Methods: Building on related literature as well as guidance from experts in game design, rehabilitation, and physical and occupational therapy, we developed eight human-robot exercise games for the Baxter Research Robot, six of which involve physical human-robot contact. After extensive iteration, these games were tested in an exploratory user study including 20 younger adult and 20 older adult users. Results: Only socially and physically interactive games fell in the highest ranges for pleasantness, enjoyment, engagement, cognitive challenge, and energy level. Our games successfully spanned three different physical, cognitive, and temporal challenge levels. User trust and confidence in Baxter increased significantly between pre- and post-study assessments. Older adults experienced higher exercise, energy, and engagement levels than younger adults, and women rated the robot more highly than men on several survey questions. Conclusions: The results indicate that social-physical exercise with a robot is more pleasant, enjoyable, engaging, cognitively challenging, and energetic than similar interactions that lack physical touch. In addition to this main finding, researchers working in similar areas can build on our design practices, our open-source resources, and the age-group and gender differences that we found.

hi

DOI Project Page [BibTex]

DOI Project Page [BibTex]


Compensating for Fingertip Size to Render Tactile Cues More Accurately
Compensating for Fingertip Size to Render Tactile Cues More Accurately

Young, E. M., Gueorguiev, D., Kuchenbecker, K. J., Pacchierotti, C.

IEEE Transactions on Haptics, 13(1):144-151, January 2020, Katherine J. Kuchenbecker and Claudio Pacchierotti contributed equally to this publication. (article)

Abstract
Fingertip haptic feedback offers advantages in many applications, including robotic teleoperation, gaming, and training. However, fingertip size and shape vary significantly across humans, making it difficult to design fingertip interfaces and rendering techniques suitable for everyone. This article starts with an existing data-driven haptic rendering algorithm that ignores fingertip size, and it then develops two software-based approaches to personalize this algorithm for fingertips of different sizes using either additional data or geometry. We evaluate our algorithms in the rendering of pre-recorded tactile sensations onto rubber casts of six different fingertips as well as onto the real fingertips of 13 human participants. Results on the casts show that both approaches significantly improve performance, reducing force error magnitudes by an average of 78% with respect to the standard non-personalized rendering technique. Congruent results were obtained for real fingertips, with subjects rating each of the two personalized rendering techniques significantly better than the standard non-personalized method.

hi

DOI [BibTex]

DOI [BibTex]


Getting in Touch with Children with Autism: Specialist Guidelines for a Touch-Perceiving Robot
Getting in Touch with Children with Autism: Specialist Guidelines for a Touch-Perceiving Robot

Burns, R. B., Seifi, H., Lee, H., Kuchenbecker, K. J.

Paladyn. Journal of Behavioral Robotics, 2020 (article) Accepted

Abstract
Children with autism need innovative solutions that help them learn to master everyday experiences and cope with stressful situations. We propose that socially assistive robot companions could better understand and react to a child’s needs if they utilized tactile sensing. We examined the existing relevant literature to create an initial set of six tactile-perception requirements, and we then evaluated these requirements through interviews with 11 experienced autism specialists from a variety of backgrounds. Thematic analysis of the comments shared by the specialists revealed three overarching themes: the touch-seeking and touch-avoiding behavior of autistic children, their individual differences and customization needs, and the roles that a touch-perceiving robot could play in such interactions. Using the interview study feedback, we refined our initial list into seven qualitative requirements that describe robustness and maintainability, sensing range, feel, gesture identification, spatial, temporal, and adaptation attributes for the touch-perception system of a robot companion for children with autism. Lastly, by utilizing the literature and current best practices in tactile sensor development and signal processing, we transformed these qualitative requirements into quantitative specifications. We discuss the implications of these requirements for future HRI research in the sensing, computing, and user research communities.

hi

Project Page [BibTex]

2015


no image
Human Machine Interface for Dexto Eka: - The humanoid robot

Kumra, S., Mohan, M., Gupta, S., Vaswani, H.

In Proceedings of the IEEE International Conference on Robotics, Automation, Control and Embedded Systems (RACE), Chennai, India, Febuary 2015 (inproceedings)

Abstract
This paper illustrates hybrid control system of the humanoid robot, Dexto:Eka: focusing on the dependent or slave mode. Efficiency of any system depends on the fluid operation of its control system. Here, we elucidate the control of 12 DoF robotic arms and an omnidirectional mecanum wheel drive using an exo-frame, and a Graphical User Interface (GUI) and a control column. This paper comprises of algorithms, control mechanisms and overall flow of execution for the regulation of robotic arms, graphical user interface and locomotion.

hi

DOI [BibTex]

2015


DOI [BibTex]


no image
Conception and development of Dexto:Eka: The Humanoid Robot - Part IV

Kumra, S., Mohan, M., Vaswani, H., Gupta, S.

In Proceedings of the IEEE International Conference on Robotics, Automation, Control and Embedded Systems (RACE), Febuary 2015 (inproceedings)

Abstract
This paper elucidates the fourth phase of the development of `Dexto:Eka: - The Humanoid Robot'. It lays special emphasis on the conception of the locomotion drive and the development of vision based system that aids navigation and tele-operation. The first three phases terminated with the completion of two robotic arms with six degrees of freedom each, structural development and the creation of a human machine interface that included an exo-frame, a control column and a graphical user interface. This phase also involved the enhancement of the exo-frame to a vision based system using a Kinect camera. The paper also focuses on the reasons behind choosing the locomotion drive and the benefits it has.

hi

DOI [BibTex]

DOI [BibTex]